Skip to content

Plumbing in Sevenoaks: what to do first when a pipe bursts

By PRG Property Services
3 Nov 20261 min read
An open white kitchen sink cupboard with a brass stop tap handle set in a small recess in the back panel

When a pipe bursts, turn the water off at the inside stop tap first, turning it clockwise. It is usually under the kitchen sink, but it can be in a downstairs toilet, a garage, a cellar or under the stairs. Turn it slowly and never force it, because too much force can damage it. If it will not turn, call a plumber.

If water may have reached the electrics, switch the power off at the fuse box. Do not touch sockets or wiring that might be wet. Check the ceilings too. A bulge means water is pooling above, so keep clear in case it comes down.

With the stop tap off, flush the toilets and open the cold taps over sinks and baths to drain the pipes. Turn off the central heating and any immersion heater, so nothing heats while the system is empty. Then soak up the water with towels or buckets, and move furniture and belongings away from the wet area.

Acting in those first minutes keeps water away from your ceilings, floors and electrics. Once the water is off, ring me to repair the pipe as soon as you can, and keep it off until I arrive. At PRG Property Services I do plumbing for homes and rented properties across Sevenoaks.

Planning a job like this? Tell us what you need.